F1
Midea Control Panel / Keypad Fault

Freezer shows F1; may not respond correctly to temperature adjustments

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Stuck button on touch panel, Moisture intrusion into control panel, Damaged user interface PCB, Loose ribbon cable to main board

How to Fix / Troubleshooting

Safety first: Unplug the freezer before removing the control panel. Avoid using sharp tools on the touch surface.

Steps to address F1:

  • Inspect panel surface: Check for spills, condensation, or physical damage around the buttons. Wipe dry with a soft cloth.
  • Power reset: Unplug for 5–10 minutes, then reconnect. If F1 returns immediately, continue.
  • Access control panel: Remove screws or clips holding the panel. Carefully pull it out to expose the user interface PCB and ribbon cable.
  • Check connections: Reseat the ribbon cable between the user interface and main board. Inspect for corrosion or bent contacts.
  • Button test: With power restored (if safe to do so), gently press each button to see if any are unresponsive or trigger multiple functions. If so, the panel is likely defective.
  • Replace panel: Install a new Midea control panel/user interface board if the original is faulty.

Note: If replacing the panel does not clear F1, the main control board may be misinterpreting keypad signals.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Control Panel / User Interface Board
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements