E15
Whirlpool
Fast Freeze Circuit / Relay Fault
Freezer shows E15; may not enter or exit fast-freeze mode correctly
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck fast-freeze relay on control board, Failed fast-freeze indicator circuit, Shorted fast-freeze button, Control board logic fault
How to Fix / Troubleshooting
Safety first: Unplug the freezer before removing control covers.
- Test fast-freeze button: With power on, press the fast-freeze button. If the indicator does not respond or stays on constantly, suspect the button or board.
- Inspect UI: Remove the control panel and check the fast-freeze button for sticking or physical damage. Replace the UI if the switch is defective.
- Control board inspection: Check the main board for a stuck relay (clicking constantly) or burn marks near the fast-freeze circuit. Replace the board if damaged.
- Verify operation: After replacement, confirm that fast-freeze engages and disengages properly and that the compressor cycles normally.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements