MAAX Spas Jet Body or Gasket Leak

Water is leaking from around a specific jet in the MAAX spa shell.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Deteriorated jet gasket, Cracked jet body, Loose jet retaining nut, Improperly seated jet insert

How to Fix / Troubleshooting

Safety: Turn off power and lower water level below the leaking jet before disassembly.

  • Identify leaking jet: Look for moisture or staining around the jet face and underneath the shell.
  • Remove jet insert: Twist and pull out the jet insert to access the body.
  • Access rear of jet: Remove the cabinet panel to reach the back of the leaking jet body.
  • Tighten retaining nut: Gently tighten the nut that holds the jet body to the shell. Do not overtighten.
  • Replace gasket or body: If the gasket is brittle or the body is cracked, remove the old jet body and install a new MAAX-compatible jet body with fresh gasket and sealant as recommended.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Jet Body and Gasket
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements