QCA Spas Jet Body or Gasket Leak

Water is leaking from around a specific jet in the spa shell.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Cracked jet body, Deteriorated jet gasket, Loose jet retaining nut, Freeze damage to plumbing behind shell

Safety: Turn off power and lower water level below the leaking jet before repair.

Access jet backside: On many QCA Spas models, you may need to remove side panels and foam insulation to reach the back of the leaking jet.
Tighten retaining nut: Gently tighten the plastic retaining nut on the back of the jet body. Do not overtighten to avoid cracking.
Replace gasket or jet body: If the leak persists, remove the jet body, clean the shell surface, and install a new gasket or complete jet body assembly compatible with QCA Spas.

Professional Required 5/5

Jet Body Assembly

Check Price on Amazon

We may earn a commission from links on this page.