Cecotec
No Dehumidification / Poor Moisture Removal
Dehumidifier runs but does not collect water in the tank
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dirty air filter or blocked airflow, Room temperature too low for effective dehumidification, Refrigerant leak or low charge, Faulty compressor or 4-way valve (if heat pump model)
How to Fix / Troubleshooting
Safety: Unplug the Cecotec dehumidifier before cleaning or internal inspection.
Steps:
- Check humidity and temperature: Use a separate hygrometer if possible. If the room is already dry (below ~40% RH) or very cold, little water will be collected.
- Clean filter and coils: Remove and wash the air filter. Vacuum dust from the evaporator and condenser coils.
- Check for frost: After running for 30–60 minutes, inspect the evaporator. If it is completely iced over, the unit may be operating in too cold an environment or have a defrost issue.
- Check compressor operation: When running, the compressor should produce a gentle vibration and the condenser should feel warm. If the fan runs but the compressor never starts, there may be an electrical or compressor fault.
- Look for oil stains: Oil on the coils or tubing can indicate a refrigerant leak. Sealed-system repairs must be done by a certified technician.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements