Cecotec Keypad / Touch Sensor Failure

Humidifier display works but buttons do not change settings

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Moisture under touch panel, Damaged keypad membrane, Loose control cable, Faulty control PCB

Safety: Unplug the Cecotec humidifier before opening the control panel.

Steps:

Drying: If the panel has been exposed to water splashes, let the unit dry for 24 hours in a warm, dry room.
Clean surface: Wipe the touch panel with a dry, soft cloth to remove residue.
Reseat cable: Open the control panel and reseat the ribbon cable between the panel and PCB.
Replace panel: If specific buttons never respond, replace the keypad or touch panel assembly.

Medium 3/5

Humidifier Control Panel Assembly

Check Price on Amazon

We may earn a commission from links on this page.