Ebac Short Cycling / Overheat or Protection Trip

Dehumidifier runs briefly then shuts off, tank not full

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blocked air filter or grille, Overheating compressor, Faulty overload protector, High ambient temperature beyond spec

How to Fix / Troubleshooting

Safety: Unplug the unit and allow it to cool before inspection.

Steps:

  • 1. Clean filter and grilles: Remove and wash the air filter. Vacuum dust from intake and outlet grilles.
  • 2. Check condenser coil: Access and clean the warm condenser coil. Ensure the fan is blowing strongly across it.
  • 3. Ambient temperature: Verify the room is not excessively hot (above the unit's rated maximum). High temperatures can cause the compressor overload to trip.
  • 4. Overload protector: Inspect the compressor overload device for signs of overheating. Replace if it trips at normal operating conditions.
  • 5. Monitor operation: After cleaning and any part replacement, run the unit and observe whether it maintains operation without frequent shutdowns.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Compressor Overload Protector
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements