Water leaking from the bottom of the dehumidifier onto the floor

Safety: Unplug the unit before tipping or disassembling. Dry any spilled water to prevent slipping.

Steps:

• 1. Inspect tank: Remove the water tank and check for cracks, warping, or missing seals. Fill it at a sink and look for leaks.
• 2. Check tank seating: Ensure the tank slides fully into place and engages any seals or gaskets. Adjust or replace worn seals as needed.
• 3. Clear drain channel: Locate the internal drain spout or channel from the evaporator tray to the tank. Use a flexible brush or pipe cleaner to remove slime and debris.
• 4. Hose connection: If using continuous drain, verify the hose is firmly attached to the Ebac drain outlet and that the hose runs downhill without kinks. Replace a cracked hose.
• 5. Test for leaks: Reassemble, add a small amount of water to the evaporator tray (if accessible), and observe for leaks before full operation.