Dehumidifier’s continuous drain feature does not work; water still fills the bucket.

Safety: Unplug before disconnecting hoses.

Steps:

• Check hose connection: Ensure the hose is firmly attached to the drain outlet on the back of the Frigidaire unit.
• Verify slope: The hose must run downhill all the way to the drain. Eliminate any loops or upward runs.
• Clear clogs: Disconnect the hose and flush it with water. Use a small brush if needed.
• Inspect internal adapter: Some models require a plug or adapter to be removed or installed for continuous drain. Confirm it is configured per the manual.
• Test without bucket: If the design allows, test drainage with the bucket removed and a pan under the outlet to confirm flow.