Dehumidifier displays FL and stops running; water bucket is full or appears full to the unit.

Safety: Unplug before removing the bucket.

Steps:

• Empty and clean bucket: Remove the bucket, empty it, and wash with warm soapy water to remove slime or mold that can jam the float.
• Check float movement: Move the float up and down; it should move freely and return to the down position when empty.
• Inspect bucket switch: Locate the bucket full switch in the cabinet. Ensure the actuator lever is not broken and moves when the bucket is inserted.
• Verify bucket seating: Reinstall the bucket firmly until it is flush with the cabinet. Some models require a firm push to engage the switch.
• Drain hose users: If using continuous drain, disconnect and flush the hose. Ensure it slopes downward with no kinks.
• Test: Plug in and run. If FL persists with an empty, properly seated bucket, the bucket switch or float assembly may need replacement.