Gree Display Failure

Display is blank or very dim, but the unit may still run when plugged in.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed LED/LCD display module, Loose display connector, Low voltage from main PCB, Damaged backlight circuit

How to Fix / Troubleshooting

Safety: Disconnect power before accessing the control panel.

Steps:

  • Brightness check: Shine a flashlight at the display; if you can faintly see numbers, the backlight is out.
  • Connector: Reseat the display connector on both the panel and main PCB.
  • Board inspection: Check for burnt components on the display board.
  • Replacement: Replace the control panel/display board if the display remains blank or dim.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Control Panel (Display Board)
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements