AGLUCKY Display Module Failure

Display segments are missing or unreadable; some numbers or letters do not show correctly.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose display ribbon cable, Failed LED/LCD segments, Moisture intrusion into display, Control board display driver fault

Safety first: Unplug before opening the control panel.

Check connections:

Remove the top/front panel to access the display board.
Ensure the ribbon cable or connector between the display and main board is fully seated.

Dry and inspect:

Look for signs of moisture or corrosion on the display PCB. Allow it to dry completely if condensation is present.

If segments remain missing, replace the display board. If a new display does not resolve the issue, the main control board may be defective.

Medium 3/5

Display / Control PCB

Check Price on Amazon

We may earn a commission from links on this page.