“Clean” indicator stays on or flashes; unit may beep and recommend cleaning; ice quality is poor.

Safety first: Unplug the ice maker before starting a deep clean.

Run a cleaning cycle:

• Drain the reservoir completely using the drain plug.
• Refill with a mixture of white vinegar and water (typically 1:1) or a manufacturer-approved ice maker cleaner.
• Activate the Clean mode (usually by holding the power or clean button as per your AGLUCKY manual). Let the unit circulate the solution for the full cycle.

Manual cleaning:

• After the cycle, unplug and drain the solution.
• Wipe the evaporator grid, water reservoir, and ice basket with a soft cloth soaked in the cleaning solution, then rinse thoroughly with clean water.
• Clean the pump intake screen and water distribution tube.

Reset indicator:

• Refill with fresh water, plug in, and follow the manual’s procedure to reset the “Clean” light (often holding the clean button for several seconds).