E9
AGLUCKY
Water Flow / Blocked Water Path Fault
E9 error displayed; unit may fill with water but then stops; sometimes accompanied by unusual buzzing from pump area.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Clogged water filter screen, Mineral scale in water distribution tube, Kinked internal water hose, Partially blocked pump outlet
How to Fix / Troubleshooting
Safety first: Unplug the unit and remove all water before disassembly.
Clean water path:
- Remove the ice basket and locate the water distribution tube or spray bar above the evaporator.
- Detach the tube (usually clips or a small screw) and flush it with warm water and white vinegar to dissolve mineral deposits. Use a soft brush or pipe cleaner if needed.
- Clean any small filter screens at the pump outlet or reservoir bottom.
Inspect hoses:
- Access internal hoses by removing the side or bottom panel.
- Check for kinks, sharp bends, or pinched sections. Straighten or reroute as needed.
Reassemble and test:
- Reinstall the water tube and hoses securely.
- Fill the reservoir with clean water, plug in, and start a cycle. Confirm that water flows evenly over the evaporator.
If E9 persists after cleaning and hose inspection, the pump may be weak and should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Distribution Tube
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements