Amica Display Module Failure

Ice maker display is blank, but internal components (fan, compressor) still run.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed display PCB, Loose display ribbon cable, Backlight failure, Low voltage to UI board

Safety first: Unplug the unit before removing the control panel.

Check contrast/brightness: Some models allow brightness adjustment; verify it is not set too low.
Inspect ribbon cable: Remove the front panel and reseat the cable between the main PCB and display module.
Measure supply voltage: Confirm the UI board receives the correct low-voltage supply from the main PCB.
Replace display module: If voltage is present but the display remains blank, replace the display/UI board assembly.

Medium 3/5

Display / UI PCB

Check Price on Amazon

We may earn a commission from links on this page.