Amica Ice Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E1
Ice maker does not produce ice; unit powers on but no water enters the ice tray.
Water Inlet Failure
E10
E10 displayed; control panel is responsive but no internal components (pump, fan, compressor) start.
Main Control Board Power Output Fault
E11
E11 error; ice cubes are irregularly shaped or stuck together, and the harvest cycle fails.
Ice Thickness Sensor or Probe Error
E12
E12 displayed; unit beeps and stops shortly after starting a cycle, often accompanied by unusual internal noise.
Circulation Pump Failure
E13
E13 error; display works but buttons do not respond or respond intermittently.
User Interface Keypad Fault
E14
E14 displayed; internal temperature is too high and ice melts quickly in the bin.
Cabinet Temperature Sensor Fault
E15
E15 error; unit does not start and an internal safety thermostat has tripped.
High-Temperature Safety Cut-Out
E16
E16 displayed; ice production is disabled and the unit indicates a door or bin switch problem.
Door / Bin Switch Error
E17
E17 error; unit cycles rapidly between start and stop without completing an ice-making cycle.
Power Supply or Voltage Fluctuation Error
E2
Ice maker stops mid-cycle and displays E2; ice tray does not return to home position after harvest.
Ice Tray Position Sensor Error
E3
Display shows E3 and the unit stops; ice production is halted and the evaporator plate does not frost properly.
Evaporator Temperature Sensor Fault
E4
Unit displays E4 and shuts down; compressor does not start or stops shortly after starting.
Compressor Overload or Start Failure
E5
E5 appears on the display; ice cubes are very thin, incomplete, or production stops during freezing stage.
Refrigeration System Underperformance
E6
Display shows E6; water in the sump does not drain and the ice-making cycle cannot restart.
Drain Pump or Water Level Error
E7
E7 error displayed; ice bin is empty but the machine indicates 'bin full' and stops making ice.
Ice Bin Full Sensor Fault
E8
E8 appears and the unit beeps; water overflows into the bin or internal sump level is too high.
Water Overflow Protection Error
E9
E9 error; fan noise stops and cabinet becomes hot around the compressor area.
Condenser Fan Failure
Symptom
Control panel lights flicker or reset when the compressor starts.
Voltage Drop / Inrush Current Issue
Symptom
Display works but buttons do not respond; unit stuck in one mode.
Keypad or Control Lock Issue
Symptom
Ice cubes appear cloudy or white instead of clear.
Entrained Air or Mineral Content in Ice
Symptom
Ice cubes have a bad taste or odor, even though they look clear.
Contaminated Water Path
Symptom
Ice cubes stick together in large clumps inside the bin.
Ice Clumping / Bin Temperature Issue
Symptom
Ice maker display is blank, but internal components (fan, compressor) still run.
Display Module Failure
Symptom
Ice maker does not turn on at all; no lights or display, completely dead.
No Power / Power Input Failure
Symptom
Ice maker door or bin flap does not close properly, causing warm air ingress.
Door Alignment / Gasket Problem
Symptom
Ice maker emits a burning smell or shows signs of overheating around the rear panel.
Electrical Overheating / Component Failure
Symptom
Ice maker forms a solid sheet of ice that does not break into cubes properly.
Overfreezing / Incorrect Harvest Timing
Symptom
Ice maker frequently trips the household circuit breaker or RCD.
Electrical Short or Ground Fault
Symptom
Ice maker interior surfaces and evaporator show heavy white scale deposits.
Limescale / Mineral Buildup
Symptom
Ice maker is very noisy during operation; rattling, buzzing, or grinding sounds.
Mechanical Noise / Vibration Issue
Symptom
Ice maker leaks water onto the floor from the rear or bottom.
External Water Leak
Symptom
Ice maker produces ice very slowly compared to normal.
Reduced Ice Production Capacity
Symptom
Ice maker produces ice, but cubes are very small or hollow.
Insufficient Water Fill or Poor Heat Exchange
Symptom
Ice maker produces no ice, but the evaporator plate gets very cold and frosts over.
Water Distribution or Circulation Failure
Symptom
Ice maker runs but produces no ice at all; evaporator plate remains warm.
Complete Cooling System Failure
Symptom
Ice maker runs continuously and does not stop even when the bin is full.
Bin Full Detection Failure
Symptom
Ice maker stops after a few cycles and requires manual restart.
Overheating or Thermal Protection Cycling
Symptom
Water accumulates inside the ice bin or under the evaporator, but not on the floor.
Internal Drainage Problem
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E1 |
Ice maker does not produce ice; unit powers on but no water enters the ice tray.
|
Water Inlet Failure | View Details |
| E10 |
E10 displayed; control panel is responsive but no internal components (pump, fan, compressor) start.
|
Main Control Board Power Output Fault | View Details |
| E11 |
E11 error; ice cubes are irregularly shaped or stuck together, and the harvest cycle fails.
|
Ice Thickness Sensor or Probe Error | View Details |
| E12 |
E12 displayed; unit beeps and stops shortly after starting a cycle, often accompanied by unusual internal noise.
|
Circulation Pump Failure | View Details |
| E13 |
E13 error; display works but buttons do not respond or respond intermittently.
|
User Interface Keypad Fault | View Details |
| E14 |
E14 displayed; internal temperature is too high and ice melts quickly in the bin.
|
Cabinet Temperature Sensor Fault | View Details |
| E15 |
E15 error; unit does not start and an internal safety thermostat has tripped.
|
High-Temperature Safety Cut-Out | View Details |
| E16 |
E16 displayed; ice production is disabled and the unit indicates a door or bin switch problem.
|
Door / Bin Switch Error | View Details |
| E17 |
E17 error; unit cycles rapidly between start and stop without completing an ice-making cycle.
|
Power Supply or Voltage Fluctuation Error | View Details |
| E2 |
Ice maker stops mid-cycle and displays E2; ice tray does not return to home position after harvest.
|
Ice Tray Position Sensor Error | View Details |
| E3 |
Display shows E3 and the unit stops; ice production is halted and the evaporator plate does not frost properly.
|
Evaporator Temperature Sensor Fault | View Details |
| E4 |
Unit displays E4 and shuts down; compressor does not start or stops shortly after starting.
|
Compressor Overload or Start Failure | View Details |
| E5 |
E5 appears on the display; ice cubes are very thin, incomplete, or production stops during freezing stage.
|
Refrigeration System Underperformance | View Details |
| E6 |
Display shows E6; water in the sump does not drain and the ice-making cycle cannot restart.
|
Drain Pump or Water Level Error | View Details |
| E7 |
E7 error displayed; ice bin is empty but the machine indicates 'bin full' and stops making ice.
|
Ice Bin Full Sensor Fault | View Details |
| E8 |
E8 appears and the unit beeps; water overflows into the bin or internal sump level is too high.
|
Water Overflow Protection Error | View Details |
| E9 |
E9 error; fan noise stops and cabinet becomes hot around the compressor area.
|
Condenser Fan Failure | View Details |
| – |
Control panel lights flicker or reset when the compressor starts.
|
Voltage Drop / Inrush Current Issue | View Details |
| – |
Display works but buttons do not respond; unit stuck in one mode.
|
Keypad or Control Lock Issue | View Details |
| – |
Ice cubes appear cloudy or white instead of clear.
|
Entrained Air or Mineral Content in Ice | View Details |
| – |
Ice cubes have a bad taste or odor, even though they look clear.
|
Contaminated Water Path | View Details |
| – |
Ice cubes stick together in large clumps inside the bin.
|
Ice Clumping / Bin Temperature Issue | View Details |
| – |
Ice maker display is blank, but internal components (fan, compressor) still run.
|
Display Module Failure | View Details |
| – |
Ice maker does not turn on at all; no lights or display, completely dead.
|
No Power / Power Input Failure | View Details |
| – |
Ice maker door or bin flap does not close properly, causing warm air ingress.
|
Door Alignment / Gasket Problem | View Details |
| – |
Ice maker emits a burning smell or shows signs of overheating around the rear panel.
|
Electrical Overheating / Component Failure | View Details |
| – |
Ice maker forms a solid sheet of ice that does not break into cubes properly.
|
Overfreezing / Incorrect Harvest Timing | View Details |
| – |
Ice maker frequently trips the household circuit breaker or RCD.
|
Electrical Short or Ground Fault | View Details |
| – |
Ice maker interior surfaces and evaporator show heavy white scale deposits.
|
Limescale / Mineral Buildup | View Details |
| – |
Ice maker is very noisy during operation; rattling, buzzing, or grinding sounds.
|
Mechanical Noise / Vibration Issue | View Details |
| – |
Ice maker leaks water onto the floor from the rear or bottom.
|
External Water Leak | View Details |
| – |
Ice maker produces ice very slowly compared to normal.
|
Reduced Ice Production Capacity | View Details |
| – |
Ice maker produces ice, but cubes are very small or hollow.
|
Insufficient Water Fill or Poor Heat Exchange | View Details |
| – |
Ice maker produces no ice, but the evaporator plate gets very cold and frosts over.
|
Water Distribution or Circulation Failure | View Details |
| – |
Ice maker runs but produces no ice at all; evaporator plate remains warm.
|
Complete Cooling System Failure | View Details |
| – |
Ice maker runs continuously and does not stop even when the bin is full.
|
Bin Full Detection Failure | View Details |
| – |
Ice maker stops after a few cycles and requires manual restart.
|
Overheating or Thermal Protection Cycling | View Details |
| – |
Water accumulates inside the ice bin or under the evaporator, but not on the floor.
|
Internal Drainage Problem | View Details |
No matching codes found
Advertisements