Blomberg No Ice Production Without Error Code

Ice maker not making any ice, no error code displayed, unit appears to run.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Water supply turned off, Partially clogged water inlet valve, Ice level sensor stuck in "full" position, Evaporator not reaching freezing temperature

How to Fix / Troubleshooting

Safety first: Unplug the unit and close the water supply before disconnecting hoses.

Steps:

  • 1. Confirm water supply: Ensure the shutoff valve is open and the line is not kinked. Briefly open the line into a bucket to verify flow.
  • 2. Check ice level sensor: Clean and inspect the ice level sensor or bin arm. Make sure it moves freely and is not blocked by ice or packaging.
  • 3. Inspect inlet valve: Clean the inlet screen and listen for the valve clicking during fill. If it does not open, test and replace the valve.
  • 4. Verify cooling: After 30–60 minutes of operation, the evaporator should be very cold and beginning to frost. If not, a sealed system or compressor issue may be present and requires a technician.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Water Inlet Valve
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements