Blomberg Ice Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Ice maker will not power on, display is blank or shows E01 shortly after startup.
Main Control Board Communication Failure
E02
Ice maker runs but no ice is produced; display shows E02 after some time.
Water Inlet Valve or Water Supply Failure
E03
Display shows E03 and ice production stops; unit may be warm inside.
Evaporator Temperature Sensor (NTC) Fault
E04
Display shows E04; ice maker may overcool or fail to maintain proper bin temperature.
Bin / Storage Compartment Temperature Sensor Fault
E05
Display shows E05; compressor does not start or stops shortly after starting.
Compressor Start / Overload Protection Fault
E06
Display shows E06; condenser fan does not run or runs intermittently, unit overheats.
Condenser Fan Motor Failure
E07
Display shows E07; water pump does not circulate water over the evaporator plate in a flake or nugget-style ice maker.
Circulation Pump Failure
E08
Display shows E08; ice level sensor error, unit may stop making ice even when bin is empty.
Ice Level Sensor / Infrared Beam Fault
E09
Display shows E09; unit reports water tank or reservoir empty even when filled.
Water Level Sensor / Float Switch Fault
E10
Display shows E10; ice maker stops mid-cycle and may drain water repeatedly.
Drain Pump or Drain Sensor Fault
E11
Display shows E11; fan inside the ice compartment does not run, ice production is slow or uneven.
Evaporator / Compartment Fan Failure
E12
Display shows E12; unit reports high temperature or fails to reach setpoint despite running.
High Temperature / Overheat Protection Fault
E13
Display shows E13; ice maker stops and may show a generic system error.
EEPROM / Configuration Data Error
E14
Display shows E14; unit indicates door or bin not closed even when it is shut.
Door / Bin Switch Fault
E15
Display shows E15; unit detects internal leak or water in base tray and stops operation.
Leak Detection / Overflow Fault
E16
Display shows E16; unit indicates low water pressure or flow.
Low Water Pressure / Flow Fault
E17
Display shows E17; unit reports ice production timeout or cycle taking too long.
Ice Production Timeout / Slow Freeze Fault
E18
Display shows E18; unit indicates harvest failure or ice not releasing from evaporator.
Harvest Cycle Failure
E19
Display shows E19; communication error between user interface and main control.
User Interface to Main PCB Communication Fault
E20
Display shows E20; unit indicates defrost or de-ice failure in models with automatic defrost.
Defrost System Failure
Symptom
Clicking sound from compressor area, compressor tries to start but shuts off repeatedly.
Compressor Start Failure
Symptom
Condensation or sweating on the exterior of the ice maker cabinet.
Cabinet Condensation
Symptom
Frost or ice buildup on the evaporator or around the fan area.
Frost Accumulation
Symptom
Ice appears cloudy or white instead of clear.
Cloudy Ice
Symptom
Ice cubes are oversized, fused together, or form large clumps.
Oversized or Clumped Ice
Symptom
Ice cubes are too small or hollow, with large holes in the center.
Hollow or Undersized Ice Cubes
Symptom
Ice has a bad taste or odor, even though water supply tastes normal.
Contaminated Ice / Odor
Symptom
Ice maker emits a burning smell or shows signs of overheating components.
Overheating Electrical Component
Symptom
Ice maker has power but does not respond to buttons or touch controls.
Unresponsive User Interface
Symptom
Ice maker is leaking water onto the floor from underneath.
External Water Leak
Symptom
Ice maker is very noisy during operation, with rattling or vibrating sounds.
Excessive Vibration or Rattling Noise
Symptom
Ice maker makes ice very slowly; daily ice production is much lower than specification.
Reduced Ice Production
Symptom
Ice maker not making any ice, no error code displayed, unit appears to run.
No Ice Production Without Error Code
Symptom
Ice maker produces ice but bin temperature is too warm; ice melts quickly.
Warm Ice Bin
Symptom
Ice maker runs continuously and does not shut off even when bin is full.
Ice Level Control Failure
Symptom
Ice maker will not start at all; no lights or display, but outlet has power.
No Power / Dead Unit
Symptom
Loud grinding or scraping noise when ice is being harvested or dropped.
Harvest Mechanism or Auger Noise
Symptom
Unit trips the household circuit breaker when compressor or heater starts.
Electrical Overload / Short Circuit
Symptom
Water pooling inside the ice bin or at the bottom of the cabinet.
Internal Drainage Problem
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Ice maker will not power on, display is blank or shows E01 shortly after startup.
|
Main Control Board Communication Failure | View Details |
| E02 |
Ice maker runs but no ice is produced; display shows E02 after some time.
|
Water Inlet Valve or Water Supply Failure | View Details |
| E03 |
Display shows E03 and ice production stops; unit may be warm inside.
|
Evaporator Temperature Sensor (NTC) Fault | View Details |
| E04 |
Display shows E04; ice maker may overcool or fail to maintain proper bin temperature.
|
Bin / Storage Compartment Temperature Sensor Fault | View Details |
| E05 |
Display shows E05; compressor does not start or stops shortly after starting.
|
Compressor Start / Overload Protection Fault | View Details |
| E06 |
Display shows E06; condenser fan does not run or runs intermittently, unit overheats.
|
Condenser Fan Motor Failure | View Details |
| E07 |
Display shows E07; water pump does not circulate water over the evaporator plate in a flake or nugget-style ice maker.
|
Circulation Pump Failure | View Details |
| E08 |
Display shows E08; ice level sensor error, unit may stop making ice even when bin is empty.
|
Ice Level Sensor / Infrared Beam Fault | View Details |
| E09 |
Display shows E09; unit reports water tank or reservoir empty even when filled.
|
Water Level Sensor / Float Switch Fault | View Details |
| E10 |
Display shows E10; ice maker stops mid-cycle and may drain water repeatedly.
|
Drain Pump or Drain Sensor Fault | View Details |
| E11 |
Display shows E11; fan inside the ice compartment does not run, ice production is slow or uneven.
|
Evaporator / Compartment Fan Failure | View Details |
| E12 |
Display shows E12; unit reports high temperature or fails to reach setpoint despite running.
|
High Temperature / Overheat Protection Fault | View Details |
| E13 |
Display shows E13; ice maker stops and may show a generic system error.
|
EEPROM / Configuration Data Error | View Details |
| E14 |
Display shows E14; unit indicates door or bin not closed even when it is shut.
|
Door / Bin Switch Fault | View Details |
| E15 |
Display shows E15; unit detects internal leak or water in base tray and stops operation.
|
Leak Detection / Overflow Fault | View Details |
| E16 |
Display shows E16; unit indicates low water pressure or flow.
|
Low Water Pressure / Flow Fault | View Details |
| E17 |
Display shows E17; unit reports ice production timeout or cycle taking too long.
|
Ice Production Timeout / Slow Freeze Fault | View Details |
| E18 |
Display shows E18; unit indicates harvest failure or ice not releasing from evaporator.
|
Harvest Cycle Failure | View Details |
| E19 |
Display shows E19; communication error between user interface and main control.
|
User Interface to Main PCB Communication Fault | View Details |
| E20 |
Display shows E20; unit indicates defrost or de-ice failure in models with automatic defrost.
|
Defrost System Failure | View Details |
| – |
Clicking sound from compressor area, compressor tries to start but shuts off repeatedly.
|
Compressor Start Failure | View Details |
| – |
Condensation or sweating on the exterior of the ice maker cabinet.
|
Cabinet Condensation | View Details |
| – |
Frost or ice buildup on the evaporator or around the fan area.
|
Frost Accumulation | View Details |
| – |
Ice appears cloudy or white instead of clear.
|
Cloudy Ice | View Details |
| – |
Ice cubes are oversized, fused together, or form large clumps.
|
Oversized or Clumped Ice | View Details |
| – |
Ice cubes are too small or hollow, with large holes in the center.
|
Hollow or Undersized Ice Cubes | View Details |
| – |
Ice has a bad taste or odor, even though water supply tastes normal.
|
Contaminated Ice / Odor | View Details |
| – |
Ice maker emits a burning smell or shows signs of overheating components.
|
Overheating Electrical Component | View Details |
| – |
Ice maker has power but does not respond to buttons or touch controls.
|
Unresponsive User Interface | View Details |
| – |
Ice maker is leaking water onto the floor from underneath.
|
External Water Leak | View Details |
| – |
Ice maker is very noisy during operation, with rattling or vibrating sounds.
|
Excessive Vibration or Rattling Noise | View Details |
| – |
Ice maker makes ice very slowly; daily ice production is much lower than specification.
|
Reduced Ice Production | View Details |
| – |
Ice maker not making any ice, no error code displayed, unit appears to run.
|
No Ice Production Without Error Code | View Details |
| – |
Ice maker produces ice but bin temperature is too warm; ice melts quickly.
|
Warm Ice Bin | View Details |
| – |
Ice maker runs continuously and does not shut off even when bin is full.
|
Ice Level Control Failure | View Details |
| – |
Ice maker will not start at all; no lights or display, but outlet has power.
|
No Power / Dead Unit | View Details |
| – |
Loud grinding or scraping noise when ice is being harvested or dropped.
|
Harvest Mechanism or Auger Noise | View Details |
| – |
Unit trips the household circuit breaker when compressor or heater starts.
|
Electrical Overload / Short Circuit | View Details |
| – |
Water pooling inside the ice bin or at the bottom of the cabinet.
|
Internal Drainage Problem | View Details |
No matching codes found
Advertisements