Blomberg No Power / Dead Unit

Ice maker will not start at all; no lights or display, but outlet has power.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown internal fuse on main PCB, Faulty power cord, Defective main control board, Tripped thermal cutout

Safety first: Unplug the unit before opening any covers.

Steps:

1. Check power cord: Inspect for cuts, burns, or loose plug blades. Replace if damaged.
2. Access main PCB: Remove the rear or side panel to reach the control board. Look for an onboard fuse and test it with a multimeter. Replace only with the same type and rating.
3. Inspect for damage: Look for burnt components or tracks on the PCB. If present, replace the board.
4. Verify outlet: Test the outlet with another appliance to confirm stable power.

Hard 4/5

Main Control PCB

Check Price on Amazon

We may earn a commission from links on this page.