Bomann ice maker displays E5, unit may run briefly then shut down, poor or no ice production.

Safety first: Unplug the ice maker before moving or cleaning it. Allow hot components to cool.

Ventilation and cleaning:

• Check placement: Ensure at least 10–15 cm of clearance around the sides and back of the unit. Do not place it in a closed cabinet or against a wall.
• Clean condenser grilles: Use a soft brush or vacuum to remove dust from the rear and side ventilation openings. Blocked airflow can cause overheating and trigger E5.
• Inspect condenser fan (if present): Through the rear grille, verify that the fan spins freely by gently nudging the blades with a plastic stick (power off). If the fan is seized or noisy, it should be replaced.
• Cool-down reset: Leave the unit unplugged for 30–60 minutes to allow the compressor and overload protector to cool. Then reconnect and test.

When to call service: If E5 returns quickly, the compressor, overload protector, or PTC starter may be failing. These are sealed-system related components and should be serviced only by a refrigeration technician.