Bomann
Bomann Ice Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
ADD
Display shows ADD or water symbol, beeping, ice production stops until water is refilled.
Low Water Level Condition
E1
Ice maker stops shortly after start, display shows E1 and no ice is produced.
Water Supply Sensor / Inlet Fault
E2
Display shows E2, ice making cycle does not start or stops mid-cycle.
Ice Full Sensor / Infrared Beam Fault
E3
Bomann ice maker shows E3 and stops, ice tray does not move to dump ice.
Ice Tray / Ejector Motor Position Fault
E4
Display shows E4, compressor does not run or stops quickly, no ice is produced.
Temperature Sensor / Thermistor Fault
E5
Bomann ice maker displays E5, unit may run briefly then shut down, poor or no ice production.
Compressor / Overheat Protection Fault
E6
Display shows E6, machine beeps and stops, ice basket may be out of position.
Ice Basket Position / Removal Detection Fault
E7
Bomann ice maker shows E7, unit may run but ice size is inconsistent or cycle aborts.
Ice Thickness Sensor / Probe Fault
E8
Display shows E8, machine beeps and stops, water pump may not run.
Water Pump / Circulation Fault
E9
Bomann ice maker shows E9, unit may power on but no functions start.
Control Board Communication / Internal Error
ICE FULL
Display shows ICE FULL or corresponding indicator light, machine stops making ice even though basket is not completely full.
False Ice Full Detection
Symptom
Buttons on the control panel do not respond or respond intermittently.
Keypad / Touch Control Failure
Symptom
Clicking sound from compressor area, compressor tries to start but shuts off repeatedly, no ice produced.
Compressor Start Failure
Symptom
Display or indicator lights flicker or go dim while the unit is running.
Unstable Power Supply / Control Panel Issue
Symptom
Display works but backlight is very dim or uneven.
Display Backlight Degradation
Symptom
Excessive frost or ice buildup on the evaporator and surrounding plastic parts.
Frost Accumulation / Defrosting Neglect
Symptom
Ice basket sensor seems to misread; machine keeps running and overfills or never stops making ice.
Ice Level Detection Failure (Under-Detection)
Symptom
Ice cubes are cloudy, white, or contain particles.
Water Quality / Mineral Contamination
Symptom
Ice cubes are hollow, very thin, or melt quickly in the basket.
Insufficient Freeze Time / High Evaporator Temperature
Symptom
Ice cubes stick together in large clumps in the basket.
Ice Clumping / Poor Storage Conditions
Symptom
Ice has an unpleasant taste or odor.
Contamination / Odor Absorption
Symptom
Ice maker does not power on at all, no lights or display, completely dead.
No Power / Input Power Failure
Symptom
Ice maker is running but makes a loud buzzing or rattling noise.
Mechanical Vibration / Loose Component
Symptom
Ice maker produces ice very slowly or cubes are much smaller than normal.
Reduced Cooling Capacity / Poor Heat Exchange
Symptom
Ice maker runs but produces no ice at all; evaporator does not get cold.
Refrigeration System Failure
Symptom
Ice maker runs but water does not flow over the evaporator; no ice forms.
Water Circulation Failure
Symptom
Ice maker stops mid-cycle and all indicators turn off, then restarts later by itself.
Overheating / Thermal Protection Cycling
Symptom
Ice shovel or ejector arm does not move; ice remains stuck on the evaporator.
Ice Harvest Mechanism Failure
Symptom
Lid does not close properly or pops open during operation.
Lid Hinge / Latch Misalignment
Symptom
Unit powers on but will not start an ice-making cycle when the start button is pressed.
Control Input / Start Circuit Fault
Symptom
Unit trips the household circuit breaker or blows a fuse when turned on.
Electrical Short / Overcurrent
Symptom
Unit vibrates excessively and moves slightly on the countertop during operation.
Imbalance / Poor Installation
Symptom
Water accumulates inside the ice-making compartment or under the ice basket.
Internal Drainage / Meltwater Management Fault
Symptom
Water leaking from the bottom or sides of the Bomann ice maker onto the countertop.
External Water Leak
Symptom
Water pump is very noisy or makes a grinding sound during operation.
Water Pump Wear / Cavitation
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| ADD |
Display shows ADD or water symbol, beeping, ice production stops until water is refilled.
|
Low Water Level Condition | View Details |
| E1 |
Ice maker stops shortly after start, display shows E1 and no ice is produced.
|
Water Supply Sensor / Inlet Fault | View Details |
| E2 |
Display shows E2, ice making cycle does not start or stops mid-cycle.
|
Ice Full Sensor / Infrared Beam Fault | View Details |
| E3 |
Bomann ice maker shows E3 and stops, ice tray does not move to dump ice.
|
Ice Tray / Ejector Motor Position Fault | View Details |
| E4 |
Display shows E4, compressor does not run or stops quickly, no ice is produced.
|
Temperature Sensor / Thermistor Fault | View Details |
| E5 |
Bomann ice maker displays E5, unit may run briefly then shut down, poor or no ice production.
|
Compressor / Overheat Protection Fault | View Details |
| E6 |
Display shows E6, machine beeps and stops, ice basket may be out of position.
|
Ice Basket Position / Removal Detection Fault | View Details |
| E7 |
Bomann ice maker shows E7, unit may run but ice size is inconsistent or cycle aborts.
|
Ice Thickness Sensor / Probe Fault | View Details |
| E8 |
Display shows E8, machine beeps and stops, water pump may not run.
|
Water Pump / Circulation Fault | View Details |
| E9 |
Bomann ice maker shows E9, unit may power on but no functions start.
|
Control Board Communication / Internal Error | View Details |
| ICE FULL |
Display shows ICE FULL or corresponding indicator light, machine stops making ice even though basket is not completely full.
|
False Ice Full Detection | View Details |
| – |
Buttons on the control panel do not respond or respond intermittently.
|
Keypad / Touch Control Failure | View Details |
| – |
Clicking sound from compressor area, compressor tries to start but shuts off repeatedly, no ice produced.
|
Compressor Start Failure | View Details |
| – |
Display or indicator lights flicker or go dim while the unit is running.
|
Unstable Power Supply / Control Panel Issue | View Details |
| – |
Display works but backlight is very dim or uneven.
|
Display Backlight Degradation | View Details |
| – |
Excessive frost or ice buildup on the evaporator and surrounding plastic parts.
|
Frost Accumulation / Defrosting Neglect | View Details |
| – |
Ice basket sensor seems to misread; machine keeps running and overfills or never stops making ice.
|
Ice Level Detection Failure (Under-Detection) | View Details |
| – |
Ice cubes are cloudy, white, or contain particles.
|
Water Quality / Mineral Contamination | View Details |
| – |
Ice cubes are hollow, very thin, or melt quickly in the basket.
|
Insufficient Freeze Time / High Evaporator Temperature | View Details |
| – |
Ice cubes stick together in large clumps in the basket.
|
Ice Clumping / Poor Storage Conditions | View Details |
| – |
Ice has an unpleasant taste or odor.
|
Contamination / Odor Absorption | View Details |
| – |
Ice maker does not power on at all, no lights or display, completely dead.
|
No Power / Input Power Failure | View Details |
| – |
Ice maker is running but makes a loud buzzing or rattling noise.
|
Mechanical Vibration / Loose Component | View Details |
| – |
Ice maker produces ice very slowly or cubes are much smaller than normal.
|
Reduced Cooling Capacity / Poor Heat Exchange | View Details |
| – |
Ice maker runs but produces no ice at all; evaporator does not get cold.
|
Refrigeration System Failure | View Details |
| – |
Ice maker runs but water does not flow over the evaporator; no ice forms.
|
Water Circulation Failure | View Details |
| – |
Ice maker stops mid-cycle and all indicators turn off, then restarts later by itself.
|
Overheating / Thermal Protection Cycling | View Details |
| – |
Ice shovel or ejector arm does not move; ice remains stuck on the evaporator.
|
Ice Harvest Mechanism Failure | View Details |
| – |
Lid does not close properly or pops open during operation.
|
Lid Hinge / Latch Misalignment | View Details |
| – |
Unit powers on but will not start an ice-making cycle when the start button is pressed.
|
Control Input / Start Circuit Fault | View Details |
| – |
Unit trips the household circuit breaker or blows a fuse when turned on.
|
Electrical Short / Overcurrent | View Details |
| – |
Unit vibrates excessively and moves slightly on the countertop during operation.
|
Imbalance / Poor Installation | View Details |
| – |
Water accumulates inside the ice-making compartment or under the ice basket.
|
Internal Drainage / Meltwater Management Fault | View Details |
| – |
Water leaking from the bottom or sides of the Bomann ice maker onto the countertop.
|
External Water Leak | View Details |
| – |
Water pump is very noisy or makes a grinding sound during operation.
|
Water Pump Wear / Cavitation | View Details |
No matching codes found
Advertisements