Bomann
Water Circulation Failure
Ice maker runs but water does not flow over the evaporator; no ice forms.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Clogged water distribution tube, Blocked spray nozzles, Failed water pump, Kinked internal water hose
How to Fix / Troubleshooting
Safety first: Unplug the unit and remove the water reservoir before accessing internal water paths.
Steps:
- Check water level: Ensure the reservoir is adequately filled.
- Clean distribution components: If accessible, remove and rinse the water distribution tray or tube above the evaporator. Clear any mineral deposits from holes or slots.
- Descale system: Run a descaling cycle if supported, or circulate a diluted descaling solution through the system following the user manual, then flush with clean water.
If water still does not circulate, the pump or internal hoses may need replacement by a technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Distribution Tube
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements