E10 displayed, unit may run but produces very little or no ice, often in a warm environment.

Safety first: Unplug the unit before cleaning or moving it.

• Check installation location: Verify the Camry ice maker is not placed next to ovens, dishwashers, or in direct sunlight. Ambient temperature should be within the range specified in the user manual.
• Improve ventilation: Ensure at least the recommended clearance around all sides and the rear. Do not enclose the unit in a tight cabinet without airflow.
• Clean condenser coil: Remove the rear panel and gently vacuum or brush dust from the condenser coil and fan area.
• Inspect overheat sensor: Locate the thermal cutoff or overheat sensor near the compressor or condenser. Check that it is securely mounted and wiring is intact.
• Reset: Allow the unit to cool for 30–60 minutes unplugged, then reconnect and test. If E10 recurs in a proper environment, the overheat sensor or control board may be faulty.