E11 error, ice cubes are misshapen or partially frozen, and cycles may abort early.

Safety first: Unplug the ice maker and drain water from the reservoir before servicing the pump.

• Inspect water distribution: Open the top cover and observe the water spraying or flowing over the evaporator (if possible). Weak or uneven flow indicates a circulation issue.
• Clean spray bar or distributor: Remove the water distribution tube or spray bar and flush it under warm water to clear mineral deposits.
• Access circulation pump: From the lower front or rear, locate the circulation pump connected to the reservoir. Remove any debris from the pump inlet screen.
• Check impeller: If accessible, inspect the impeller for scale buildup and clean gently.
• Reconnect and test: Reassemble, refill the reservoir, and run a cycle. If E11 persists and the pump does not run, replace the Camry circulation pump.