E19
Camry
Harvest Motor or Ice Release Mechanism Fault
E19 error, unit may freeze water but fail to release ice from the evaporator.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed harvest motor, Jammed ice rake or grid, Broken gear in harvest assembly, Loose motor wiring
How to Fix / Troubleshooting
Safety first: Unplug the ice maker before working near moving parts or the evaporator.
- Observe harvest (if possible): During a cycle, check whether the ice rake or grid moves to push ice into the bin. Lack of movement suggests a harvest issue.
- Check for jams: Remove any large ice chunks or foreign objects blocking the rake or grid.
- Inspect harvest motor: Access the side or rear of the ice‑making chamber to locate the harvest motor assembly. Check for broken gears or loose mounting.
- Verify wiring: Ensure the motor connector is secure and wires are not damaged.
- Replace motor assembly: If the motor does not run when commanded and receives power (requires testing), replace the Camry harvest motor assembly.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Harvest Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements