E6 error code, unit may start but quickly shuts down, sometimes with a clicking sound from the compressor area.

Safety first: Unplug the ice maker. Components near the compressor can be hot; allow them to cool before touching.

• Check ventilation: Ensure the Camry ice maker has proper clearance around vents and is not pushed tightly against a wall, which can cause overheating.
• Inspect condenser coil: Clean dust and lint from the condenser coil and fan area using a soft brush and vacuum. Poor airflow can trigger overload.
• Examine start relay and overload: Remove the cover on the side of the compressor to access the start relay and overload protector. Look for burn marks or melted plastic.
• Shake test relay: Gently shake the start relay; if it rattles loosely, it may be failed and should be replaced with a compatible Camry compressor start device.
• Check power supply: Avoid using long extension cords or power strips. Plug directly into a grounded wall outlet.

If E6 persists after cleaning and replacing the start relay/overload, the compressor itself may be failing and requires professional service.