Electrolux ice maker shows E08; compressor does not start or cycles off quickly.

Safety First: Unplug the unit. Compressor terminals carry high voltage; only proceed if you are comfortable using a multimeter around line voltage.

• Check line voltage: Verify proper voltage at the outlet under load. Low voltage can cause start failures and E08.
• Inspect start device: Remove the start relay and overload from the compressor terminals. Shake the relay gently; if it rattles or smells burnt, replace it.
• Test overload: Measure continuity across the overload protector. If open at room temperature and not resettable, replace it.
• Check compressor windings: With all wires removed, measure resistance between C-R, C-S, and R-S terminals. Compare to Electrolux specs. Very high or zero readings may indicate a failed compressor.
• Replace start device: Install a new OEM Electrolux start relay/overload kit. If the compressor still fails to start and windings test poorly, professional compressor replacement is required.