Electrolux Ice Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
E01
Electrolux ice maker will not power on, display is blank, no interior lights or sounds.
Main Control Board Power Supply Fault
E02
Electrolux ice maker powers on but does not produce any ice; display shows E02.
Water Inlet Valve or Water Supply Fault
E03
Electrolux ice maker stops mid-cycle and displays E03; no new ice is harvested.
Ice Level Sensor or Bin Sensor Fault
E04
Electrolux ice maker shows E04 and shuts down; unit may be unusually warm inside.
High Temperature or Condenser Overheat Fault
E05
Electrolux ice maker displays E05 and stops making ice; water may be present in the bin or sump.
Drain Pump or Drain System Fault
E06
Electrolux ice maker shows E06; unit may fill with water but no ice forms on the evaporator plate.
Evaporator Thermistor or Temperature Sensor Fault
E07
Electrolux ice maker displays E07 and stops mid-harvest; ice may be stuck on the evaporator plate.
Harvest Motor or Ice Sweep Motor Fault
E08
Electrolux ice maker shows E08; compressor does not start or cycles off quickly.
Compressor Start Circuit or Overload Fault
E09
Electrolux ice maker displays E09; water overflows the sump or ice thickness is excessive.
Water Level Sensor or Float Switch Fault
E10
Electrolux ice maker shows E10; unit fills and freezes but does not release ice properly.
Ice Thickness Sensor or Probe Fault
E11
Electrolux ice maker displays E11; water does not circulate over the evaporator plate.
Circulation Pump Fault
E12
Electrolux ice maker shows E12; unit attempts to start but immediately shuts down.
Low Voltage or Power Supply Fault
E13
Electrolux ice maker displays E13; fan noise may be absent and cabinet feels warm.
Evaporator Fan Motor Fault
E14
Electrolux ice maker shows E14; unit may run continuously without shutting off even when bin is full.
Bin Full Switch or Sensor Fault
E15
Electrolux ice maker displays E15; control panel buttons may not respond correctly.
User Interface or Touchpad Fault
E16
Electrolux ice maker shows E16; unit may stop and display a generic sensor error.
Cabinet or Ambient Thermistor Fault
E17
Electrolux ice maker displays E17; unit may shut down with water present in the base pan.
Leak Detection or Overflow Sensor Fault
E18
Electrolux ice maker shows E18; unit may intermittently stop and restart without completing cycles.
Communication Error Between UI and Main Control
E19
Electrolux ice maker displays E19; ice production is disabled due to detected low water temperature or freeze protection.
Freeze Protection or Inlet Water Temperature Fault
E20
Electrolux ice maker shows E20; unit may run but produce very little or no ice.
Refrigerant System Performance Fault
Symptom
Electrolux ice maker cycles on and off frequently without producing much ice.
Short Cycling
Symptom
Electrolux ice maker does not respond to button presses or touch controls intermittently.
Intermittent User Interface Operation
Symptom
Electrolux ice maker door or bin is difficult to close or does not seal properly.
Door or Bin Alignment Issue
Symptom
Electrolux ice maker emits a burning smell or hot plastic odor during operation.
Overheating Electrical Component
Symptom
Electrolux ice maker frequently forms large clumps of ice in the bin that stick together.
Ice Clumping in Bin
Symptom
Electrolux ice maker interior light does not turn on when the door or bin is opened.
Interior Light Failure
Symptom
Electrolux ice maker is leaking water onto the floor from underneath the unit.
External Water Leak
Symptom
Electrolux ice maker is making very small or thin ice cubes/slabs.
Insufficient Ice Thickness
Symptom
Electrolux ice maker is unusually noisy during operation (grinding, rattling, or buzzing).
Mechanical Noise or Vibration
Symptom
Electrolux ice maker makes ice but production is very slow compared to normal.
Reduced Ice Production
Symptom
Electrolux ice maker not making any ice at all; display appears normal and no error code is shown.
No Ice Production Without Error Code
Symptom
Electrolux ice maker produces very large, thick ice slabs that are difficult to break apart.
Excessive Ice Thickness
Symptom
Electrolux ice maker runs but the ice bin remains empty; you can hear the compressor and fans.
No Ice Due to Poor Freezing
Symptom
Electrolux ice maker stops making ice when the bin is not full and resumes only after power cycling.
Control Logic or Sensor Intermittent Fault
Symptom
Electrolux ice maker vibrates excessively or walks on the floor during operation.
Excessive Vibration
Symptom
Electrolux ice maker will not turn on at all, but the outlet has power.
No Power to Controls
Symptom
Ice appears cloudy or white instead of clear from the Electrolux ice maker.
Entrained Air or Mineral Content in Ice
Symptom
Ice from the Electrolux ice maker has a bad taste or odor.
Contaminated Water Path or Storage Bin
Symptom
Water is pooling inside the Electrolux ice bin or cabinet instead of draining properly.
Internal Drain Blockage
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| E01 |
Electrolux ice maker will not power on, display is blank, no interior lights or sounds.
|
Main Control Board Power Supply Fault | View Details |
| E02 |
Electrolux ice maker powers on but does not produce any ice; display shows E02.
|
Water Inlet Valve or Water Supply Fault | View Details |
| E03 |
Electrolux ice maker stops mid-cycle and displays E03; no new ice is harvested.
|
Ice Level Sensor or Bin Sensor Fault | View Details |
| E04 |
Electrolux ice maker shows E04 and shuts down; unit may be unusually warm inside.
|
High Temperature or Condenser Overheat Fault | View Details |
| E05 |
Electrolux ice maker displays E05 and stops making ice; water may be present in the bin or sump.
|
Drain Pump or Drain System Fault | View Details |
| E06 |
Electrolux ice maker shows E06; unit may fill with water but no ice forms on the evaporator plate.
|
Evaporator Thermistor or Temperature Sensor Fault | View Details |
| E07 |
Electrolux ice maker displays E07 and stops mid-harvest; ice may be stuck on the evaporator plate.
|
Harvest Motor or Ice Sweep Motor Fault | View Details |
| E08 |
Electrolux ice maker shows E08; compressor does not start or cycles off quickly.
|
Compressor Start Circuit or Overload Fault | View Details |
| E09 |
Electrolux ice maker displays E09; water overflows the sump or ice thickness is excessive.
|
Water Level Sensor or Float Switch Fault | View Details |
| E10 |
Electrolux ice maker shows E10; unit fills and freezes but does not release ice properly.
|
Ice Thickness Sensor or Probe Fault | View Details |
| E11 |
Electrolux ice maker displays E11; water does not circulate over the evaporator plate.
|
Circulation Pump Fault | View Details |
| E12 |
Electrolux ice maker shows E12; unit attempts to start but immediately shuts down.
|
Low Voltage or Power Supply Fault | View Details |
| E13 |
Electrolux ice maker displays E13; fan noise may be absent and cabinet feels warm.
|
Evaporator Fan Motor Fault | View Details |
| E14 |
Electrolux ice maker shows E14; unit may run continuously without shutting off even when bin is full.
|
Bin Full Switch or Sensor Fault | View Details |
| E15 |
Electrolux ice maker displays E15; control panel buttons may not respond correctly.
|
User Interface or Touchpad Fault | View Details |
| E16 |
Electrolux ice maker shows E16; unit may stop and display a generic sensor error.
|
Cabinet or Ambient Thermistor Fault | View Details |
| E17 |
Electrolux ice maker displays E17; unit may shut down with water present in the base pan.
|
Leak Detection or Overflow Sensor Fault | View Details |
| E18 |
Electrolux ice maker shows E18; unit may intermittently stop and restart without completing cycles.
|
Communication Error Between UI and Main Control | View Details |
| E19 |
Electrolux ice maker displays E19; ice production is disabled due to detected low water temperature or freeze protection.
|
Freeze Protection or Inlet Water Temperature Fault | View Details |
| E20 |
Electrolux ice maker shows E20; unit may run but produce very little or no ice.
|
Refrigerant System Performance Fault | View Details |
| – |
Electrolux ice maker cycles on and off frequently without producing much ice.
|
Short Cycling | View Details |
| – |
Electrolux ice maker does not respond to button presses or touch controls intermittently.
|
Intermittent User Interface Operation | View Details |
| – |
Electrolux ice maker door or bin is difficult to close or does not seal properly.
|
Door or Bin Alignment Issue | View Details |
| – |
Electrolux ice maker emits a burning smell or hot plastic odor during operation.
|
Overheating Electrical Component | View Details |
| – |
Electrolux ice maker frequently forms large clumps of ice in the bin that stick together.
|
Ice Clumping in Bin | View Details |
| – |
Electrolux ice maker interior light does not turn on when the door or bin is opened.
|
Interior Light Failure | View Details |
| – |
Electrolux ice maker is leaking water onto the floor from underneath the unit.
|
External Water Leak | View Details |
| – |
Electrolux ice maker is making very small or thin ice cubes/slabs.
|
Insufficient Ice Thickness | View Details |
| – |
Electrolux ice maker is unusually noisy during operation (grinding, rattling, or buzzing).
|
Mechanical Noise or Vibration | View Details |
| – |
Electrolux ice maker makes ice but production is very slow compared to normal.
|
Reduced Ice Production | View Details |
| – |
Electrolux ice maker not making any ice at all; display appears normal and no error code is shown.
|
No Ice Production Without Error Code | View Details |
| – |
Electrolux ice maker produces very large, thick ice slabs that are difficult to break apart.
|
Excessive Ice Thickness | View Details |
| – |
Electrolux ice maker runs but the ice bin remains empty; you can hear the compressor and fans.
|
No Ice Due to Poor Freezing | View Details |
| – |
Electrolux ice maker stops making ice when the bin is not full and resumes only after power cycling.
|
Control Logic or Sensor Intermittent Fault | View Details |
| – |
Electrolux ice maker vibrates excessively or walks on the floor during operation.
|
Excessive Vibration | View Details |
| – |
Electrolux ice maker will not turn on at all, but the outlet has power.
|
No Power to Controls | View Details |
| – |
Ice appears cloudy or white instead of clear from the Electrolux ice maker.
|
Entrained Air or Mineral Content in Ice | View Details |
| – |
Ice from the Electrolux ice maker has a bad taste or odor.
|
Contaminated Water Path or Storage Bin | View Details |
| – |
Water is pooling inside the Electrolux ice bin or cabinet instead of draining properly.
|
Internal Drain Blockage | View Details |
No matching codes found
Advertisements