E13
Electrolux
Evaporator Fan Motor Fault
Electrolux ice maker displays E13; fan noise may be absent and cabinet feels warm.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed evaporator fan motor, Ice buildup blocking fan blade, Loose fan wiring connector, Defective fan speed control on board
How to Fix / Troubleshooting
Safety First: Disconnect power before accessing the evaporator compartment. Fan blades can be sharp.
- Listen for fan: When the unit is running (before unplugging), note whether you hear the evaporator fan. No sound suggests a fan issue.
- Inspect for ice blockage: Remove the interior panel to access the fan. Clear any ice or frost obstructing the blade. If heavy frost is present, allow the unit to fully defrost and investigate defrost issues.
- Check fan movement: Spin the fan blade by hand; it should rotate freely. If stiff or seized, replace the motor.
- Test motor: Measure resistance across the fan motor leads. Compare to Electrolux specs. Check for proper voltage at the connector when the fan should be running.
- Replace evaporator fan: Remove mounting screws, transfer the blade to the new motor if needed, reconnect wiring, and reassemble panels. Restore power and verify airflow.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Evaporator Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements