Water leaking from the bottom or sides of the Euhomy ice maker onto the counter or floor.

Safety first: Unplug the unit and mop up any spilled water to prevent slipping or electrical hazards.

Steps:

• 1. Check reservoir fill level: Ensure you are not filling above the MAX line. Overfilling can cause overflow during operation.
• 2. Inspect drain plug: If your model has a bottom drain, verify the cap or plug is fully tightened and the gasket is intact. Replace the gasket if cracked.
• 3. Examine internal hoses: Remove the outer panels and visually inspect all silicone or vinyl hoses for cracks, loose clamps, or disconnections. Re-seat and clamp as needed.
• 4. Inspect reservoir: Remove and examine the plastic water tank for hairline cracks, especially at seams and corners. Replace if damaged.
• 5. Test for leaks: Fill the reservoir and observe the internal components while the unit runs to pinpoint the leak source.