Euhomy
Euhomy Ice Makers Error Codes
Complete list of fault codes and troubleshooting guides. Use the search below to find your specific error.
Advertisements
ADD
Display shows 'ADD' or 'ADD WATER'; ice-making stops until user intervenes.
Water Supply Interruption
E1
Countertop Euhomy ice maker stops making ice and displays E1 on the control panel.
Ambient Temperature Sensor Fault
E10
Euhomy ice maker shows E10 and beeps; unit may shut down shortly after starting.
Overfill Protection / Drain Sensor Error (Plumbed Models)
E2
Euhomy ice maker shows E2 and stops the ice-making cycle shortly after starting.
Water Level Sensor / Float Switch Fault
E3
Euhomy ice maker displays E3 and stops mid-cycle; ice size is inconsistent before the error appears.
Evaporator Temperature Sensor Fault
E4
Euhomy ice maker shows E4 and will not start the ice-making cycle.
Ice Full Sensor / Infrared Beam Fault
E5
Euhomy ice maker displays E5 and shuts down; compressor may not start.
Compressor Overload / High Temperature Protection
E6
Euhomy ice maker shows E6 and does not produce ice; compressor may run briefly then stop.
Refrigeration System Fault / Low Refrigerant or Blockage (Generic Protection Code)
E7
Euhomy ice maker displays E7 and beeps; unit may not respond to button presses.
Keypad / Control Panel Communication Error
E8
Euhomy ice maker shows E8 and stops; water pump may not run.
Water Pump Fault / Pump Overload
E9
Euhomy ice maker displays E9 and will not complete an ice cycle; ice may stick to the evaporator.
Ice Harvest / Motor Position Error
H1
Euhomy ice maker displays H1 or 'HI' and stops making ice; fan may run but compressor does not.
High Ambient Temperature / Overheat Protection
LO
Display shows 'LO' or low water icon; unit beeps and stops making ice.
Low Water Level Detection
Symptom
Buttons respond intermittently; sometimes require very hard presses.
Worn or Contaminated Keypad
Symptom
Compressor clicks on and off repeatedly and does not stay running.
Compressor Start / Overload Cycling
Symptom
Condenser fan does not run, but compressor becomes very hot.
Condenser Fan Failure
Symptom
Display and lights work, but pressing the ON/OFF or START button does nothing.
Unresponsive Keypad / Control Lock
Symptom
Display segments are missing or unreadable, but unit still runs.
Partial Display Failure
Symptom
Display shows normal operation but ice production is very slow compared to specifications.
Reduced Ice Production Capacity
Symptom
Ice appears cloudy or white instead of clear.
High Mineral Content / Aerated Ice
Symptom
Ice cubes are too large, sticking together, or forming a solid block.
Overfreezing / Long Freeze Cycle
Symptom
Ice has a bad taste or odor (plastic, chemical, or musty).
Contaminated Water Path
Symptom
Ice maker is very noisy during operation (grinding, rattling, or loud humming).
Excessive Operational Noise
Symptom
Ice maker produces ice, but ice cubes are very small or hollow.
Insufficient Water Flow to Evaporator
Symptom
Ice maker runs but produces no ice at all.
No Ice Production
Symptom
Ice maker runs continuously and does not stop making ice, even when the bin is full.
Ice Full Detection Failure
Symptom
Ice maker vibrates excessively or moves on the countertop during operation.
Vibration / Mechanical Imbalance
Symptom
Ice melts quickly in the storage bin and does not stay solid for long.
Insufficient Ice Storage Insulation / High Bin Temperature
Symptom
Ice sticks to the evaporator and does not drop into the basket during harvest.
Poor Ice Release / Sticking to Evaporator
Symptom
Unit beeps repeatedly but no error code is shown; operation may pause.
General Alarm Without Display Code
Symptom
Unit does not power on at all; no lights or display.
No Power / Dead Unit
Symptom
Unit emits a burning smell during operation.
Overheating Electrical Component
Symptom
Unit starts a cycle but shuts off after a few minutes without making ice.
Premature Cycle Termination
Symptom
Unit trips the household breaker or GFCI when starting.
Electrical Short / Ground Fault
Symptom
Water leaking from the bottom or sides of the Euhomy ice maker onto the counter or floor.
External Water Leak
Symptom
Water pooling inside the ice storage bin or under the evaporator area.
Internal Drainage Problem
Symptom
Water pump runs but no water reaches the evaporator tray.
Water Circulation Failure
| Error Code | Symptom | Fault Type | Guide |
|---|---|---|---|
| ADD |
Display shows 'ADD' or 'ADD WATER'; ice-making stops until user intervenes.
|
Water Supply Interruption | View Details |
| E1 |
Countertop Euhomy ice maker stops making ice and displays E1 on the control panel.
|
Ambient Temperature Sensor Fault | View Details |
| E10 |
Euhomy ice maker shows E10 and beeps; unit may shut down shortly after starting.
|
Overfill Protection / Drain Sensor Error (Plumbed Models) | View Details |
| E2 |
Euhomy ice maker shows E2 and stops the ice-making cycle shortly after starting.
|
Water Level Sensor / Float Switch Fault | View Details |
| E3 |
Euhomy ice maker displays E3 and stops mid-cycle; ice size is inconsistent before the error appears.
|
Evaporator Temperature Sensor Fault | View Details |
| E4 |
Euhomy ice maker shows E4 and will not start the ice-making cycle.
|
Ice Full Sensor / Infrared Beam Fault | View Details |
| E5 |
Euhomy ice maker displays E5 and shuts down; compressor may not start.
|
Compressor Overload / High Temperature Protection | View Details |
| E6 |
Euhomy ice maker shows E6 and does not produce ice; compressor may run briefly then stop.
|
Refrigeration System Fault / Low Refrigerant or Blockage (Generic Protection Code) | View Details |
| E7 |
Euhomy ice maker displays E7 and beeps; unit may not respond to button presses.
|
Keypad / Control Panel Communication Error | View Details |
| E8 |
Euhomy ice maker shows E8 and stops; water pump may not run.
|
Water Pump Fault / Pump Overload | View Details |
| E9 |
Euhomy ice maker displays E9 and will not complete an ice cycle; ice may stick to the evaporator.
|
Ice Harvest / Motor Position Error | View Details |
| H1 |
Euhomy ice maker displays H1 or 'HI' and stops making ice; fan may run but compressor does not.
|
High Ambient Temperature / Overheat Protection | View Details |
| LO |
Display shows 'LO' or low water icon; unit beeps and stops making ice.
|
Low Water Level Detection | View Details |
| – |
Buttons respond intermittently; sometimes require very hard presses.
|
Worn or Contaminated Keypad | View Details |
| – |
Compressor clicks on and off repeatedly and does not stay running.
|
Compressor Start / Overload Cycling | View Details |
| – |
Condenser fan does not run, but compressor becomes very hot.
|
Condenser Fan Failure | View Details |
| – |
Display and lights work, but pressing the ON/OFF or START button does nothing.
|
Unresponsive Keypad / Control Lock | View Details |
| – |
Display segments are missing or unreadable, but unit still runs.
|
Partial Display Failure | View Details |
| – |
Display shows normal operation but ice production is very slow compared to specifications.
|
Reduced Ice Production Capacity | View Details |
| – |
Ice appears cloudy or white instead of clear.
|
High Mineral Content / Aerated Ice | View Details |
| – |
Ice cubes are too large, sticking together, or forming a solid block.
|
Overfreezing / Long Freeze Cycle | View Details |
| – |
Ice has a bad taste or odor (plastic, chemical, or musty).
|
Contaminated Water Path | View Details |
| – |
Ice maker is very noisy during operation (grinding, rattling, or loud humming).
|
Excessive Operational Noise | View Details |
| – |
Ice maker produces ice, but ice cubes are very small or hollow.
|
Insufficient Water Flow to Evaporator | View Details |
| – |
Ice maker runs but produces no ice at all.
|
No Ice Production | View Details |
| – |
Ice maker runs continuously and does not stop making ice, even when the bin is full.
|
Ice Full Detection Failure | View Details |
| – |
Ice maker vibrates excessively or moves on the countertop during operation.
|
Vibration / Mechanical Imbalance | View Details |
| – |
Ice melts quickly in the storage bin and does not stay solid for long.
|
Insufficient Ice Storage Insulation / High Bin Temperature | View Details |
| – |
Ice sticks to the evaporator and does not drop into the basket during harvest.
|
Poor Ice Release / Sticking to Evaporator | View Details |
| – |
Unit beeps repeatedly but no error code is shown; operation may pause.
|
General Alarm Without Display Code | View Details |
| – |
Unit does not power on at all; no lights or display.
|
No Power / Dead Unit | View Details |
| – |
Unit emits a burning smell during operation.
|
Overheating Electrical Component | View Details |
| – |
Unit starts a cycle but shuts off after a few minutes without making ice.
|
Premature Cycle Termination | View Details |
| – |
Unit trips the household breaker or GFCI when starting.
|
Electrical Short / Ground Fault | View Details |
| – |
Water leaking from the bottom or sides of the Euhomy ice maker onto the counter or floor.
|
External Water Leak | View Details |
| – |
Water pooling inside the ice storage bin or under the evaporator area.
|
Internal Drainage Problem | View Details |
| – |
Water pump runs but no water reaches the evaporator tray.
|
Water Circulation Failure | View Details |
No matching codes found
Advertisements