Euhomy Water Circulation Failure

Water pump runs but no water reaches the evaporator tray.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Airlock in pump, Disconnected or kinked water hose, Severely clogged distribution tray holes, Pump impeller worn

How to Fix / Troubleshooting

Safety first: Unplug the unit and drain water before removing hoses.

Steps:

  • 1. Bleed air: Tilt the unit gently forward and backward to help purge air from the pump and lines.
  • 2. Check hoses: Inspect all hoses from the pump to the evaporator tray for kinks or disconnections. Reattach and secure with clamps.
  • 3. Clean tray holes: Remove the water distribution tray and clear each hole with a toothpick or soft brush.
  • 4. Replace pump: If the pump motor runs but does not move water even after cleaning and bleeding, replace the water circulation pump.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Water Circulation Pump
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements