G3 Ferrari
False Low Water Detection
"ADD WATER" indicator stays on even when the reservoir is full.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck float switch, Mineral buildup on water level probes, Faulty water level sensor, Loose sensor wiring
How to Fix / Troubleshooting
Safety first: Unplug the ice maker before removing the reservoir or covers.
Step-by-step:
- Remove and clean reservoir: Wash the water tank with mild detergent and rinse thoroughly.
- Clean float or probes: If your G3 Ferrari model uses a float, move it up and down to ensure free movement and clean it with vinegar to remove scale. For probe-type sensors, gently scrub the metal rods.
- Check wiring: Inspect the harness from the water level sensor to the control PCB for damage or loose connectors.
- Reset: Refill the tank, reinstall, and power cycle the unit.
When to call a technician: If the indicator remains on, the water level sensor or control board input may be defective.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Level Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements