G3 Ferrari Condenser Fan Failure

Condenser fan does not run, but compressor becomes very hot.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Burned-out fan motor, Obstruction preventing fan rotation, Faulty fan wiring or connector, Fan control circuit failure on PCB

Safety first: Unplug the unit and allow the compressor area to cool before touching.

Step-by-step:

Check for obstructions: Spin the fan blades by hand (with power off). Remove any debris.
Inspect wiring: Ensure the fan motor connector is firmly attached to the control board.
Test operation: Plug in briefly and observe if the fan starts when the compressor runs. If not, the motor may be faulty.

When to call a technician: Replace the condenser fan motor and check the control PCB if no voltage is supplied to the fan.

Hard 4/5

Condenser Fan Motor

Check Price on Amazon

We may earn a commission from links on this page.