Display shows ICE FULL or ice full icon; machine stops making ice even though the basket is not completely full.

Safety first: Unplug the unit before cleaning sensor areas.

• 1. Empty and reseat basket: Remove the ice basket, empty it, and reinstall it fully into position.
• 2. Clean sensor lenses: Locate the ice full sensor pair (small windows on each side of the bin). Clean both with a soft, dry cloth. Remove any condensation or mineral deposits.
• 3. Reduce reflections: Avoid placing shiny metal objects close to the sensor area that could reflect the beam.
• 4. Check alignment: Ensure both sensor halves are directly facing each other and not bent or loose.
• 5. Test operation: Plug in and start a cycle. If ICE FULL appears immediately with an empty bin, the sensor may need replacement.

Warning: Do not spray water directly into the sensor openings; moisture can damage the electronics.