Display is dim, flickering, or segments are missing, but the unit still makes ice.

Safety first: Unplug the unit before removing the control panel.

Steps to address display issues:

• 1. Check for moisture: Inspect the display area for condensation or spills. Dry thoroughly if moisture is present.
• 2. Reseat ribbon cable: Remove the control panel cover and gently disconnect and reconnect the ribbon cable between the display and main board.
• 3. Inspect display board: Look for corrosion or burnt components. If present, replace the display board.
• 4. Replace display module: If segments are permanently missing, install a new HOMCOM display/control board assembly.

Note: While the unit may still function, a failing display makes troubleshooting other issues difficult; replacement is recommended.