HOMCOM
Ice Shovel Gear or Motor Noise
Loud grinding or clicking noise during ice ejection or when the shovel moves.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or stripped plastic gears in shovel drive, Foreign object jammed in gear train, Loose motor mounting screws, Failing ice making gear motor bearings
How to Fix / Troubleshooting
Safety first: Unplug the ice maker before reaching inside or removing covers.
Steps to reduce or eliminate noise:
- 1. Check for obstructions: Open the lid and remove any large ice chunks or foreign objects around the shovel and evaporator.
- 2. Access the gear housing: Remove the side or top cover to expose the shovel gear motor assembly. Inspect the gears for broken or missing teeth.
- 3. Tighten mounts: Ensure the motor and gear housing screws are tight. Loose mounts can cause vibration and noise.
- 4. Replace damaged gears or motor: If gears are stripped or the motor shaft is loose and noisy, replace the HOMCOM ice shovel gear motor assembly.
- 5. Reassemble and test: After replacement, run a cycle and listen for smooth operation.
Note: Do not apply grease unless specified by HOMCOM; excess lubricant can contaminate ice and attract debris.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Ice Shovel Gear Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements