Indesit Display / UI Power Fault

Display is blank or very dim, but the compressor and fans still run.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed display module, Loose UI connector, Faulty low-voltage supply on main board, Damaged backlight LEDs

Safety: Unplug the unit before removing the control panel.

Check UI connections: Remove the front panel and reseat the ribbon cable or harness to the display.
Inspect for damage: Look for burnt components on the UI board or main board's low-voltage section.
Measure low-voltage output: A qualified person can check for 5V/12V outputs from the main board to the UI. If missing, replace the main control board.
Replace display module: If voltages are correct but the display remains blank, replace the user interface/display assembly.

Medium 3/5

Display Module

Check Price on Amazon

We may earn a commission from links on this page.