Safety: Unplug the unit before accessing internal fans.

Identify which fan is faulty: Some Indesit ice makers have both a condenser fan (rear, near compressor) and an evaporator fan (inside the ice-making compartment). Listen for which fan is not running when the unit is powered.
Check for obstructions: Remove any panels needed to access the fan. Inspect for ice buildup, plastic packaging, or wiring touching the blades. Clear obstructions and ensure the fan spins freely by hand.
Test fan motor: Disconnect the fan connector and measure resistance across the motor terminals. An open circuit indicates a failed motor. Also check for visible burn marks or melted insulation.
Inspect wiring harness: Follow the fan wiring back to the control board. Look for pinched or broken wires and reseat connectors.
Replace faulty fan: If the motor is defective, replace it with the correct Indesit fan motor assembly. Refit all covers and test operation.

E06 displayed; ice production stops; fan noise may be absent or intermittent.

Possible Causes