E9
ProfiCook
Evaporator / Internal Fan Motor Fault
E9 displayed; unit powers on but internal fan does not run and ice production is poor or absent.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed internal circulation fan motor, Fan blades obstructed by ice, Loose fan wiring connector, Fan motor bearing seizure
How to Fix / Troubleshooting
Safety first: Unplug the unit before opening the lid or removing covers.
- Inspect for ice buildup: Look through the vents near the evaporator area for ice blocking the fan blades. If present, unplug and allow the unit to defrost completely (30–60 minutes).
- Check for obstructions: Ensure no packaging material or loose parts are interfering with the fan.
- Test fan operation: After defrosting, plug the unit in and briefly start a cycle with the lid open (if safe). Observe whether the fan spins freely.
- If fan does not run: The evaporator fan motor or its wiring is likely defective. Replacement requires removing the internal cover and swapping the fan assembly.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Evaporator Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements