Russell Hobbs Extended Freeze Time – Reduced Cooling Capacity

Ice maker makes ice very slowly compared to normal

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Dirty condenser coil restricting heat dissipation, Failing condenser fan motor, Partial refrigerant loss, Evaporator partially iced over or scaled

How to Fix / Troubleshooting

Safety: Unplug the unit before cleaning or accessing the rear compartment.

Steps to improve ice production speed:

  • Improve ventilation: Move the ice maker away from walls and heat sources. Provide at least 10–15 cm clearance on all sides and ensure the room is not excessively hot.
  • Clean condenser and fan: Remove the rear panel and thoroughly clean dust from the condenser coil and fan blades. Ensure the fan spins freely and runs when the compressor is on.
  • Defrost and descale: Turn the unit off, unplug, and allow any internal ice buildup to melt. Clean the evaporator with a descaling solution to remove mineral deposits.
  • Check door/lid seal: Make sure the top lid closes properly and is not warped, allowing warm air to enter.

If performance remains poor after cleaning and ensuring good airflow, the sealed refrigeration system may be weak or partially blocked, which requires a refrigeration technician.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Condenser Fan Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements