Russell Hobbs Ice Makers Error Codes

E1

Ice maker beeps and shows E1, unit will not start ice-making cycle

Ambient Temperature Sensor Failure

E10

E10 displayed, unit beeps and stops, water present inside but not draining from internal sump

Internal Drain / Overflow Protection Fault

E2

E2 displayed, ice maker stops mid-cycle or will not start, fan may still run

Evaporator Temperature Sensor Failure

E3

E3 error, ice basket does not move correctly or ice-making stops during harvest

Ice Full / Position Sensor or Micro-switch Fault

E4

E4 displayed, ice maker stops, water tray may be out of position

Water Tray Position Error

E5

E5 error, unit powers on but compressor does not run, no ice production

Compressor or Overload Protection Fault

E6

E6 displayed, ice maker stops, water pump may not run or runs dry

Water Pump or Water Level Sensor Fault

E7

E7 error, fan may not run, unit overheats and stops making ice

Condenser Fan Motor Fault

E8

E8 displayed, ice size selection not working correctly, unit may stop mid-cycle

Ice Thickness / Size Sensor Fault

E9

E9 error, display works but buttons unresponsive or random functions trigger

Keypad / Control Panel Communication Fault

Symptom

Clicking sound from compressor area, but compressor does not stay running

Compressor Start Failure

Symptom

Condensation forming heavily on the outside of the cabinet

Excessive External Condensation

Symptom

Display works but some buttons do not respond or respond intermittently

Keypad Contact Failure

Symptom

Fan runs but compressor is silent, no cooling

Open Compressor Circuit or Control Failure

Symptom

Grinding or squealing noise from inside the ice-making compartment

Mechanical Drive or Motor Binding

Symptom

Ice cubes are fused together in large clumps in the basket

Ice Clumping in Storage

Symptom

Ice cubes stick to the evaporator and do not drop into the basket

Harvest Failure – Ice Not Releasing

Symptom

Ice has a strange or chemical taste

Taste Contamination from Water or Internal Surfaces

Symptom

Ice maker leaks water onto the countertop

External Water Leak – Reservoir or Drain System

Symptom

Ice maker makes a hissing or gurgling sound from inside the cabinet

Normal Refrigerant Flow or Possible Refrigerant Leak

Symptom

Ice maker makes ice very slowly compared to normal

Extended Freeze Time – Reduced Cooling Capacity

Symptom

Ice maker powers on but will not start when pressing the ON/START button

User Interface or Safety Interlock Fault

Symptom

Ice maker produces very small or hollow ice bullets

Insufficient Ice Formation – Water Flow or Temperature Issue

Symptom

Ice maker runs but ice melts quickly in the storage basket

Poor Ice Storage Insulation or High Internal Temperature

Symptom

Ice maker runs but produces no ice at all

No Ice Production – Refrigeration System or Water Supply Issue

Symptom

Ice maker shows 'ADD WATER' or similar indicator even when reservoir is full

False Low Water Detection

Symptom

Ice maker stops after a few minutes and beeps, ice basket not full

False Ice Full Detection

Symptom

Ice maker stops mid-cycle and all lights flash

General Control Fault or Overload Protection

Symptom

Ice maker will not power on at all, no lights or display

No Power – Input or Main PCB Failure

Symptom

Loud rattling or vibrating noise during operation

Excessive Vibration or Loose Component

Symptom

Unit emits a burning or electrical smell during operation

Overheating Electrical Component

Symptom

Unit frequently trips the household circuit breaker or RCD

Electrical Short or Ground Fault

Symptom

Unit is excessively hot to the touch on the sides or top

Overheating Cabinet

Symptom

Unit vibrates and moves slightly on the countertop during operation

Instability Due to Uneven Surface or Imbalance

Symptom

Water appears inside the ice storage area or under the ice basket

Internal Leak or Excess Condensation

Symptom

Water in reservoir becomes cloudy or has an unpleasant smell

Biofilm or Mineral Contamination in Water System