Sencor Water circulation failure

Water pump makes a humming noise but no water reaches the evaporator tray.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Clogged water filter or intake screen, Airlock in water line, Failed water pump, Kinked or blocked water hose

How to Fix / Troubleshooting

Safety: Unplug the ice maker before removing the water tank or internal panels.

Steps:

  • Check water level: Ensure the reservoir is adequately filled.
  • Clean intake screen: Remove the water tank and clean any mesh filter or intake screen at the bottom with a soft brush.
  • Bleed air: Refill the tank and tilt the unit slightly backward and forward to help remove trapped air from the pump.
  • Inspect hoses: Open the rear/bottom panel and check for kinks or blockages in the silicone hoses. Straighten or replace as needed.
  • Replace pump: If the pump hums but does not move water even after cleaning and bleeding, replace the water circulation pump.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Water Circulation Pump
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements