E16
Siemens
Evaporator Fan Speed or Feedback Error
E16 displayed, ice maker noisy during operation, fan speed error logged
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn evaporator fan motor bearings, Obstructed fan blades, Faulty fan tachometer feedback, Loose fan connector
How to Fix / Troubleshooting
Safety: Unplug the unit before working near the fan.
Fan service:
- Access fan: Remove the interior rear panel to expose the evaporator fan assembly.
- Inspect blades: Check for ice, plastic, or wiring contacting the blades. Clear any obstructions.
- Spin test: Rotate the fan by hand. Roughness, wobble, or resistance indicates a failing motor.
- Check connector: Ensure the fan plug is fully seated on the harness and that no pins are corroded.
- Replace motor: If noisy or not reaching proper speed, replace the Siemens evaporator fan motor assembly.
After replacement: Restore power and verify that the error clears and noise is reduced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Evaporator Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements