Tristar
No Ice Production
Ice maker runs but produces no ice at all.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed compressor, Low refrigerant charge, Non-functioning water circulation pump, Severely scaled evaporator surface
How to Fix / Troubleshooting
Safety first: Unplug the unit before internal inspection. Do not attempt refrigerant repairs without certification.
Steps to diagnose:
- Check water supply: Ensure the reservoir is full and the pump is circulating water over the evaporator (you should hear water flowing during operation).
- Inspect evaporator: After 10–15 minutes of operation, the evaporator plate should be cold and starting to frost. If it remains warm, the refrigeration system is not working properly.
- Clean scale: If the evaporator is coated with white mineral deposits, descale using a manufacturer-approved cleaner to restore heat transfer.
- Check fan and condenser: Confirm the condenser fan runs and the coil is clean.
- If compressor not running: The issue may be with the Tristar compressor, start relay, or control board. These typically require professional diagnosis.
- Call a technician: For suspected sealed-system issues (no frost, compressor hot or silent), contact a refrigeration technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements