E15 error on display; unit may shut down and not respond until power is cycled.

Safety: Unplug the ice maker immediately if you see E15, smell burning, or hear popping sounds. Do not continue to operate the unit.

Steps:

• 1. Visual inspection: Remove the rear and top covers. Look for burnt wiring, melted connectors, or scorch marks on the main control board.
• 2. Check motors: Inspect the water pump, condenser fan, and harvest motor for signs of overheating or melted plastic. Disconnect each motor one at a time and test if E15 persists (advanced).
• 3. Harness check: Look for pinched or rubbed-through wires where the harness passes through metal openings. Repair with heat-shrink and reroute as needed.
• 4. Replace failed parts: Any obviously shorted motor or burnt control board should be replaced with the correct Vremi replacement parts.

Warning: Because E15 often indicates an electrical short, if you are not experienced with electrical diagnostics, contact a professional technician.