How to Fix / Troubleshooting

Safety: Unplug the ice maker before defrosting or opening panels.

Steps to resolve:

1. Inspect evaporator: Remove the top cover and look at the evaporator plate. If it is heavily iced over, the unit may trigger E8.
2. Manual defrost: Leave the unit unplugged with the cover open for several hours until all ice melts. Place towels to catch water. Do not use sharp tools to chip ice.
3. Clean air paths: Ensure the internal fan and air channels are clear of dust and ice. Clean the fan blades gently.
4. Sensor check: If your model has a dedicated defrost or over-ice sensor on the evaporator, inspect its placement and wiring. Reattach if loose.
5. Restart and test: After full defrost and reassembly, plug in and run a cycle. If E8 returns quickly, the evaporator sensor or control board may be faulty and require replacement.

Tip: Regular cleaning and descaling reduce ice buildup on the evaporator and prevent E8 errors.

E8 error displayed; unit may fill with water but will not freeze properly; cycles may abort early.

Possible Causes