Ice maker leaks water onto the counter or inside the cabinet; puddles form under or around the unit.

Safety: Unplug the unit and dry any spilled water to prevent slipping or electrical hazards.

Steps:

• 1. Inspect reservoir: Remove the water tank and check for cracks or pinholes. Replace the Vremi water reservoir if damaged.
• 2. Check drain plug: Ensure the bottom drain plug (if equipped) is fully seated and the gasket is intact. Replace the gasket if it is brittle or deformed.
• 3. Inspect hoses: Remove the side or bottom panel and examine all silicone water lines for splits, loose clamps, or disconnections. Reattach or replace hoses as needed.
• 4. Overfill issues: If water overflows the ice tray, test and, if necessary, replace the water inlet valve or water level float switch.

Note: After repairs, run the unit while observing for leaks before returning it to normal use.