Vremi
Internal Circulation Fan Failure
Unit runs but the internal fan does not blow air; interior feels stagnant and ice production is reduced.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed internal circulation fan motor, Obstructed fan blades, Loose fan wiring, Control board fan driver fault
How to Fix / Troubleshooting
Safety: Unplug the ice maker before accessing internal fans.
Steps:
- 1. Access fan: Remove the side or top cover to locate the internal circulation fan near the evaporator.
- 2. Check for obstructions: Clear any ice, wiring, or debris blocking the fan blades.
- 3. Test fan: With the unit briefly powered (hands clear), see if the fan attempts to spin. If not, test for voltage at the fan connector (advanced).
- 4. Replace fan: If the motor is receiving power but not spinning, replace the Vremi internal circulation fan motor.
Note: Proper airflow is critical for efficient ice production; do not operate the unit with a non-functioning fan.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Internal Circulation Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements