LO or LOW water indicator on display, unit beeps and stops making ice

Safety: Disconnect power before removing internal covers. For simple refilling, you may leave the unit plugged in but avoid spilling water on electrical parts.

Steps to clear LO:

• Refill reservoir: Remove the ice basket and fill the water reservoir to the indicated MAX line using clean, potable water.
• Check for leaks: Ensure water is not draining out due to a loose drain cap or hose.
• Inspect float/sensor: If LO persists with a full reservoir, unplug the unit and inspect the float or water level sensor for scale or debris. Clean with warm water and vinegar if needed.
• Verify float movement: Move the float up and down; it should move freely and not stick.
• Sensor wiring: Check the sensor harness connection to the control board and reseat it.
• Replace sensor: If the sensor or float switch is mechanically or electrically defective, replace the water level sensor assembly.